https://forums.qrecall.com/posts/list/6.page JForum - http://www.jforum.net
There was an interrupted backup 10 days ago. But every backup since then has gone perfectly (I checked the log file).

I think the failure to clear the "backup problem" is likely a bug, albeit a minor one.]]> https://forums.qrecall.com/posts/preList/566/2654.page https://forums.qrecall.com/posts/preList/566/2654.page GMT
If you haven't already done so, please send a diagnostic report. Then, if you have the time, please locate the following files and send copies to [url=mailto:support@qrecall.com]support@qrecall.com[/url]:

1) The files in the folder ~/Library/Preferences/QRecall/Status

2) Locate the archive that's being captured, right/control+click on its icon and choose Show Package Contents. Find its status.plist file.

Send me those files and I'll have a look.

]]> https://forums.qrecall.com/posts/preList/566/2655.page https://forums.qrecall.com/posts/preList/566/2655.page GMT
It is always a Macbook archive that shows up as not being run for x days, but when I check the actions have been running correctly. I should add that all my verify, merge and compact actions run from my iMac.]]> https://forums.qrecall.com/posts/preList/566/2656.page https://forums.qrecall.com/posts/preList/566/2656.page GMT I think I've discovered where the confusion lies. You have (or had) two archives. You were capturing to the older archive, but then you deleted all of the actions for that archive, created a new archive (with a different name), and created new actions for the new archive. The new archive is working just fine, but the old archive is no longer being captured to.

That's the reason it's status is giving you that warning.

Now, if the old archive is really dead and/or gone, then you can remove it from the status window by right/control+clicking on its status and choosing the [b]Forget[/b] command. The status window will stop tracking that archive (unless you perform another action on it, then it will start monitoring it again).]]> https://forums.qrecall.com/posts/preList/566/2657.page https://forums.qrecall.com/posts/preList/566/2657.page GMT Adrian,

Can you clarify a few things? Are you capturing to the same archive on the NAS, or separate archives for the iMac and Macbook? Is the status message you're talking about the one on the Macbook or the iMac? Does the iMac and Macbook show different status message for the same archive? Is the NAS connected to the Macbook all of the time, or only during the capture? Does the Macbook capture occur when it's logged in or out?

When archives are shared across networks, keeping the status information up-to-date across all participants gets a little tricky.]]> https://forums.qrecall.com/posts/preList/566/2658.page https://forums.qrecall.com/posts/preList/566/2658.page GMT I think I've discovered where the confusion lies. You have (or had) two archives. You were capturing to the older archive, but then you deleted all of the actions for that archive, created a new archive (with a different name), and created new actions for the new archive. The new archive is working just fine, but the old archive is no longer being captured to.

That's the reason it's status is giving you that warning.

Now, if the old archive is really dead and/or gone, then you can remove it from the status window by right/control+clicking on its status and choosing the [b]Forget[/b] command. The status window will stop tracking that archive (unless you perform another action on it, then it will start monitoring it again).[/quote]

D'oh! QRecall is clearly smarter than I am. I could make the weak argument that it should stop doing this, taking the position that deleting the actions implicitly means I don't want to track it any more. But that would be pretty weak.]]> https://forums.qrecall.com/posts/preList/566/2659.page https://forums.qrecall.com/posts/preList/566/2659.page GMT
[quote=James Bucanek]Can you clarify a few things? Are you capturing to the same archive on the NAS, or separate archives for the iMac and Macbook?[/quote]
Each computer has its own pair of archives, one each for the system volume and the Users Volume.
[quote=James Bucanek]Is the status message you're talking about the one on the Macbook or the iMac?[/quote]
It is the status message on the iMac
[quote=James Bucanek]Does the iMac and Macbook show different status message for the same archive?[/quote]
I can't remember off hand, I'll check next time it happens
[quote=James Bucanek]Is the NAS connected to the Macbook all of the time, or only during the capture?[/quote]
The NAS is connected wirelessly via the router so unless the Macbook drops the connection, which is rare, but not unheard of, it is connected all the time. The NAS always reappears after sleep too.
[quote=James Bucanek]Does the Macbook capture occur when it's logged in or out?[/quote]
Captures only occur while logged in.
[quote=James Bucanek]When archives are shared across networks, keeping the status information up-to-date across all participants gets a little tricky.[/quote]
I can appreciate that, which is why it isn't a big issue for me.

Adrian]]> https://forums.qrecall.com/posts/preList/566/2660.page https://forums.qrecall.com/posts/preList/566/2660.page GMT
I've done what you said about reset TM, it worked for a day, then the next day it was back to normal.

Thanks !!]]> https://forums.qrecall.com/posts/preList/566/2877.page https://forums.qrecall.com/posts/preList/566/2877.page GMT